Table Tennis Booster Tutorial (English Narrated Version)

Today we will show you how to apply booster
oil on a table tennis rubber The rubber we used today is hurricane 3,
this is a very common rubber to be used with booster After applying the booster,it can increase the speed,spin
and most importantly enhancing the feeling of ball control. There are many different types of booster in the market,we
will use this one. this one can last for around three months. First we brush a thin layer of glue onto the rubber Then we let it try Then we start applying the booster It is just like brushing the glue Make sure you don’t too much, otherwise,
bubbles will form . so a thin layer is just right. After finishing a layer, you should let it dry and
wait for twelve hours(or one day). You should let it completely dry before
you put on another layer Some people think two layers are enough.
Others think that it is still not soft enough,
and may put more layers.
But we do’t recommend putting more than 3 layers. You can see the rubber is now curved.
We can now put on another layer. It is just like the first time.
Brush it evenly. After finishing, you can let it dry. Then we can glue the rubber to the blade This is the 3rd day. Though it is already dry,
but it is two curly. So we recommend waiting
for another day before gluing the rubber Now we see the rubber is flatter now,
therefore, we can start gluing the rubber to the blade After putting on the glue,we then let it dry It is just like the normal gluing procedure Now we put the rubber to the blade. You see, the rubber actually becomes larger.
So we cut the extra rubber. To sum up, the booster can enhance the speed,
spin and feeling of ball control. Now it is finished and it can be used right away

41 thoughts on “Table Tennis Booster Tutorial (English Narrated Version)

  1. I am trying to the steps, after 2nd layer, I have already waited for 2 days, the rubber is still very curly! What have I done wrong? Can I glue it even if it's very curly?

  2. If I'm boosting a new Hurricane 3 neo, do I remove the glue like layer on the sponge before applying the WBG or WSG and the booster? 

  3. Since you are from Asia, can you tell me if there really exist the Commercial, Provincial and National versions? Or just the sellers pretend they exist and just want to make more money. Thanks.

  4. Thank you for the instructional video. Doing my second set of rubbers (DHS H3N & Yinhe Moon). The effect is still there on my other blade (now two months of use).

    For whoever contemplating in buying the product, the rubber becomes noticeably bouncier and spinnier.

    Please have patience while boosting the rubber, do not rush the process. Have fun!

  5. I really dont like putting a layer of glue before the booster… I did it with a Hurricane 3 Neo and it felt like wet glue just before being ready to glue to the blade, didnt like the result. I unglued the rubber from the blade, peeled off the glue and glue again from dry, better result. Also, i dont feel the booster will get straight to the sponge if i put a layer of glue first interfering with the sponge-booster interaction

  6. i ve applied the booster for the 2nd layer but my rubber still not curve since the first layer. already waiting for a day. am i did wrong ? i am using h8

  7. Hi, im out of glue so can i like use butterfly free chack first time before applying the booster…. then like nittaku finezip glue when gluing to the blade?… after the booster process? or do i need to just use one type of glue whole time?

  8. Not only can increase speed and spin, falco booster can take away the old glue that on sponge for long time. Just apply a layer of booster on your sponges, after 15 minutes, booster will soften the old glue and can be rub it out easily with out damage the sponge , especially good for those expensive tenergy. After remove old glue, just apply one more thing layer booster, then let it dry and reglue it back on your blade.

Leave a Reply

Your email address will not be published. Required fields are marked *